Page 22 - 그런포스

그런포스 그룹

인증서

덴마크 ISO 9001 덴마크 ISO 14001 덴마크 OHSAS 18001 덴마크 표준 인증 덴마크 EMAS 인증 미국 BSI 인증 영국 EMAS 인증 프랑스 환경부 인증

NOTICE OF COMPLETION
AND
AUTHORIZATION TO APPLY THE UL MARK CE RT I F I CAT E O F CO M P L I ANCE CERTIFICATE OF COMPLIANCE CERTIFICATE OF COMPLIANCE
2016-12-16
Certificate Number 20141023-E188652 Certificate Number 20140528-E89820 Certificate Number 20141023-MH26400
Mr. Nikolaj Korshoej Report Reference E188652-19980527 Report Reference E89820-19840302 Report Reference MH26400-2004-10-27
GRUNDFOS HOLDING A/S Issue Date 2014-OCTOBER-23 Issue Date 2014-MAY-28 Issue Date 2014-OCTOBER-23
POUL DUE JENSENS VEJ 7
BJERRINGBRO, 8850, DK
Issued to: GRUNDFOS HOLDING A/S Issued to: GRUNDFOS HOLDING A/S Issued to: GRUNDFOS HOLDING A/S
Our Reference: File E359133, Vol. 1 Order: 10933234
Project: 4787059979 POUL DUE JENSENS VEJ 7 POUL DUE JENSENS VEJ 7 POUL DUE JENSEN VEJ 7
Your Reference: 4509186096/1 Project 4787059979 8850 BJERRINGBRO DENMARK 8850 BJERRINGBRO DENMARK 8850 BJERRINGBRO DENMARK
Project Scope: cURus – Revision File E359133, vol. 1: to add a new motor MGE / MLE f/by 90
rated 1.5 kW, 380 -500 V, 50/60 Hz, 440-480 V, 50/60 Hz, Cl. F, E.P. (Low speed This is to certify that PACKAGED PUMPING SYSTEMS This is to certify that COMPONENT - IMPEDANCE-PROTECTED MOTORS This is to certify that DRINKING WATER SYSTEM COMPONENTS
variant) representative samples of Hydro 2000 Series, Hydro MPC Series, BoosterpaQ, representative samples of See addendum page for models. representative samples of LEAD CONTENT VERIFICATION OF PRODUCTS IN
CMBE, CRE-Plus, CR-Plus, GES, Hydro Multi-B, Hydro
Dear Mr. Nikolaj Korshoej: CONTACT WITH POTABLE WATER
Multi-E, Hydro Solo-E and Hydro Solo-S, Hydro NP See addendum page
Congratulations! UL's investigation of your product(s) has been completed under the above Reference Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Number and the product was determined to comply with the applicable requirements. This letter Have been investigated by UL in accordance with the Have been investigated by UL in accordance with the
temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply the Standard(s) indicated on this Certificate. Standard(s) indicated on this Certificate.
UL Mark at authorized factories under UL's Follow-Up Service Program. To provide your manufacturer(s) Standard(s) for Safety: See addendum page for standards.
with the intended authorization to use the UL Mark, you must send a copy of this notice to each Additional Information: See the UL Online Certifications Directory at
manufacturing location currently authorized under File E359133, Vol. 1. Standard(s) for Safety: UL 508 & CSA C22.2 No.14-13, Industrial Control www.ul.com/database for additional information Standard(s) for Safety: NSF/ANSI 61 - Drinking Water System Components -
Equipment
Records in the Follow-Up Services Procedure covering the product are now being prepared and will be UL 508A, Industrial Control Panels Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be Health Effects
NSF/ANSI 372 - Drinking Water System Components -
sent in the near future. Until then, this letter authorizes application of the UL Mark for 90 days from the UL 778, Motor-Operated Water Pumps considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Lead Content
date indicated above. CSA C22.2 No. 108-14, Liquid Pumps The UL Recognized Component Mark for the U.S. generally consists of the manufacturer’s identification and Additional Information: See the UL Online Certifications Directory at
Canadian requirements.
Additional Information: See the UL Online Certifications Directory at catalog number, model number or other product designation as specified under “Marking” for the particular
Additional requirements related to your responsibilities as the Applicant can be found in the document www.ul.com/database for additional information Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that www.ul.com/database for additional information
“Applicant responsibilities related to Early Authorizations” that can be found at the following web-site: have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may
be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when
http://www.ul.com/EAResponsibilities
specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. The
Certification and Follow-Up Service.
Only those products bearing the UL Certification Mark should be considered as being covered by UL's UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Any information and documentation provided to you involving UL Mark services are provided on behalf of Certification and Follow-Up Service. manufacturer’s identification and catalog number, model number or other product designation as specified under
“Marking” for the particular Recognition as published in the appropriate UL Directory.
UL LLC (UL) or any authorized licensee of UL. Look for the UL Certification Mark on the product.
Look for the UL Certification Mark on the product. Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather
We are excited you are now able to apply the UL Mark to your products and appreciate your business. than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Feel free to contact me or any of our Customer Service representatives if you have any questions.
Look for the UL Recognized Component Mark on the product.
Very truly yours, Reviewed by:
Mauro V. Cerioli Bruce A. Mahrenholz
Senior Project Engineer CPO Director
Mauro.Cerioli@ul.com Bruce.A.Mahrenholz@ul.com
36220381-8f8f-49ee-9517-5ebd290b3bd8
Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services William R. Carney, Director, North American Certification Programs Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services
UL LLC UL LLC UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus contact a local UL Customer Service Representative at www.ul.com/contactus contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1 Page 1 of 2 Page 1 of 2
This is an electronically generated letter. Signatures are not required for this document to be valid. Page 1 of 1
UL MGE,MLE UL HYDRO UL UP,UPS UL CR,CRI,CRN WRAS SCALA
헝가리 ISO 9001 헝가리 ISO 14001 헝가리 OHSAS 18001



 
Digitally signed by
joakim.birgander@lr.org
Date: 2017.12.20
11:12:41 +01'00'

ABS BV CCS LR RMRS
대만 ISO 9001 대만 ISO 14001 대만 OHSAS 18001 (American Bureau of Shipping) (Bureau Veritas) (China Classification Society) (Lloyd's Register) (Russian Maritime)
※ 이외 다수의 인증 및 특허 보유
22 23